Ti 84 Plus Ce Ram Cleared

This program simulates the “RAM Cleared” screen so that you can fool your teachers if you need to. To input lowercase text and disable the “Done” message at the end of the program, you will need to use assembly hex codes; you can learn more about them here.

TI-84 ram cleared. My TI-84 Plus CE might not be charging properly anymore. I’ve had it for 5 years and have had no charging problems until now. Normally, when it charges, an orange light on the side comes on and it turns green when the battery’s full. Yesterday, when I tried to charge it (battery was under half-full. The TI-85 was the second graphing calculator made by Texas Instruments. (The first was the TI-81). The TI-84 is a much newer version and has more functionality and memory. Try pressing the reset button on the back of the calc. If this doesn't work, try resetting the calculator and re-sending the OS: 1) Hold 2nd and del at the same time. 2) While still holding the buttons, press the reset button on the back of the calc. Yes, on ti83plus (SE) or ti84plus (SE) or ti84plus C SE you have flash memory which is not erased after a ram clear. So to protect a program, press '2nd' then 'Mem', select 'Archive' then go to program menu and select the program.

WARNING: Inputting hexadecimal codes incorrectly can crash your calculator, either resetting the RAM or, in worst cases, crashing the calculator permanently. Make sure you check (and double check) that the code is correct, and if you can, try it on an emulator first.

Required Subprograms:

  • Run Indicator On/Off* (Off program)

Download: FAKEMEM.8xp

Trying to help my daughter.
I've tried all the fixes I found on line and nothing has worked.
Replaced all batteries. Held Clear while removing and reinstalling a battery.
Taken out all batteries and let it sit for 30 minutes.
Still locked up. Cursor is solid in upper left and Screen shows TI-84 Plus
2.55 MP
Ti 84 Plus Ce Ram ClearedRam Cleared

Ti 84 Plus Ce Ram Keeps Clearing


Ti 84 Plus Ce Ram Cleared 3.7


Ti 84 Plus Ce Ram Cleared Mode

Press Alph F1-F4 to locate shortcut menus
only key that changes anything is the on button but that just removes all the text and leaves a solid block in the upper left corner.
I've tried connecting it to my mac and downloaded the TI-Connect app but it doesn't see the calculator.

Ti 84 Plus Ce Applications

Ti 84 Plus Ce Ram Cleared Dpf

Any help would be appreciated.